FIND OUT HOW CY.PAG. IT CAN SAVE YOU UP TO 85% COMPRESSED AIR
Cy.Pag. has been producing premium cylinders for pneumatics for over 25 years and has conducted research with its team of specialized engineers to allow companies to control the compressed air used by the cylinders.
The goal is to allow companies to reduce the pneumatic cylinder drive energy costs by up to 85% and, at the same time, to satisfy the performance control inputs.
CY.PAG. OPTIMISAIR
OptimisAir connects to existing pneumatic cylinders and, thanks to the intelligent compressed air management, optimizes its consumption by reducing energy costs.
OptimisAir analyzes the operation of the pneumatic cylinders and provides real-time data.
OptimisAir improves the operation of the cylinders, without affecting the function of the machine, and provides detailed information on performance through a standard data transmission protocol.
PNEUMATIC CYLINDERS ENERGY SAVING AND MONITORING
The exponential increases in energy costs are a burden on the balance sheets of companies like never before.
At the same time, European Community’s Green Deal pushes toward the energy saving objectives and the conscious use of environmental resources.
It’s an urgent need to consider the economic impact of compressed air production on the total cost of energy. Having up-to-date control tools it’s mandatory to obtain real-world data.
HOW DOES IT WORK
OptimisAir activates an iterative process of progressive reduction of the amount of pneumatic energy introduced into the cylinder and at the same time monitors the operating parameters of the cylinder itself.
The device reduces the amount of compressed air used while verifying in real-time that the kinematic operating parameters of the cylinder do not change.
This occurs without dissipation since no pressure reductions are made. The amount of compressed air to be used is quantified and used at its maximum pneumatic energy value.
This allows to eliminate overconsumption (due, for example, to safety margins in the selection of the diameter of the cylinders) and at the same time reduce back pressures and waste due to dissipation, optimizing the cylinder system and improving its thermodynamic performance.
ENERGY SAVING
SUSTAINABILITY
MONITORING
EFFICIENCY
The OptimisAir device can be sold already pre-installed on the cylinder or to be installed on existing cylinders. It can be installed on all types of double-acting cylinders with a magnetic rod without having to modify the machine or system.
TECHNICAL FEATURES
- Suitable for both installations on existing systems and new ones
- Communication through the Modbus RTU protocol
- 24V DC power supply
- More than 50 different physical variables monitored
- Up to 85% reduction in the consumption of compressed air
- No setup required, the algorithm is always self-learning
- One system can manage up to 10 pneumatic cylinders at the same time
CALCULATE HOW MUCH YOU CAN SAVE
Discover how much you can save with OptimisAir installed on your pneumatic cylinders, thanks to our savings calculator. Enter the technical characteristics of your cylinders, operating times and read the results.
HOW MUCH DOES COMPRESSED AIR COST?
The cost of energy is constantly increasing and unforeseen events, such as the pandemic and world conflicts, inevitably affect it.
The European Community consumes 1,013 TWh of electricity for industrial use each year, of which 20%, equal to 203 TWh per year, is destined on average for the production of compressed air.
If the average energy consumption for the industrial sector attributable to compressed air is 20%, for some energy-intensive fields the incidence can reach up to 40%.
For companies in the energy-intensive sectors, this means that on a bill of € 100,000 per month, about € 20,000 are destined for the production of compressed air, also to drive pneumatic cylinders.
OPTIMISAIR IS PREPARED FOR INDUSTRY 4.0
OptimisAir is designed to monitor, manage and optimize the filling of pneumatic cylinders’ chambers.
OptimisAir can provide important information on cylinder performance, transforming a simple pneumatic cylinder into a system that optimizes performance, meeting the requirements of industry 4.0.
OptimisAir is an effective 4.0 smart controller for pneumatic cylinders:
- It is easy to install “Plug and Produce“
- It produces energy savings of up to 85%
FIND OUT HOW YOU CAN SAVE UP TO 85% WITH CY.PAG.
Leave your details and receive free documentation for:
- Reduce waste of compressed air
- Take advantage of unique and innovative products not known in the pneumatic market
- Obtain professional and specialized maintenance
